UK 01664 454795
Description and Specification.
CurveCut has many useful features for plasma, laser, waterjet and oxy-fuel cutting.
For machines that have full control over the Z axis you can program the pierce height and cut height directly. This is useful for machines running Mach3 for instance.
The tool definition allows you define all of the important parameters for cutting. You can define as many tools as you like for different materials etc.
Kerf width. Draw your part the size you want and let CurveCut work out where to run the torch.
Automatic cut ordering to ensure that inside contours are always cut before outside contours.
Oxy-fuel preheat time.
Pierce delay time.
Optional ramp piercing. Instead of plunging straight in, the cutter torch can ramp in, reducing the amount of material blown back into the torch. This increases consumable life and reduces faulty cuts due to blocked or obstructed nozzles
Once you have defined you tool you can set up the cut. CurveCut gives you many options to optimise cutting.
Parts can be placed in an array to quickly fill a sheet with minimum effort.
SheetCam & Mach 3 Software are fully compatible with our LPT 2,3 and 4 axis driven kits for the mill and and Plasma
If you require any further information then please do not hesitate to contact us on Tel: (01664) 454795
Price SheetCam £150 Inc P&P to the UK Includes 2 Hours Telephone support.
Cam Software for your Mill, Plasma, water and Oxyacetylene and Laser all in one !!